SLIDING HOOKS:

HORIZONTAL

VERTICAL

 

 

 

 

 

 

NOTES:

NOTE 1: Can also apply to vertical basic concept. Also, edges are preferred square – the rounded design is only to illustrate the range of possibilities we wish to work with – perhaps it could look good – but square (see attachment 1) is our standard preference.

NOTE 2: Bar and hooks should all be in antique looking metal. Hooks should be able to slide up and down bar to allow different spacing.

NOTE 3: There should be a convenient wall attachment on the rear.

 

EXAMPLES: This is for reference only

This is the basic concept of the sliding hook bar. You can use this look metal, if possible, in addition to the standard wrought iron look we maintain as our standard. However, since we wish to work with a rustic green finish on the wood as well, this look to the metal may work also. Bar should be attached to the rest of design (see below).